专题见解

2021-09-02

Dukane Japan at the Medical Device Development & Manufacturing Expo

The Dukane Japan team participated for the first time at Manufacturing World Osaka 2013. Dukane had a booth at the 4th annualMedical Device Development & Manufacturing Expo.Dukane Japan team at the Medical Device Development &Manufacturing Expo in Osaka, Japan.The staff in

详情
2021-09-02

Aesthetic Assembly - The Art to Attractive Bonding

After carefully molding a beautiful product, nothing is worse than seeing it destroyed during assembly. Every joining process is capable of causing marking, flash, particulate, damage to appendages, or other aesthetic defects. However, with proper part design and processing, a finished weld can be i

详情
2021-09-02

Assembly Demands Grow for Medical Plastics

A study done at Value Plastics, a molder of precision molded couplers for medical applications, shows that a servo welder produces hermetic welds with a standard deviation of 0.4% compared to 2.9% when using a pneumatic welder.Those results were reported last month at ANTEC in Cincinnati, OH by thre

详情
2021-09-02

Experiments in Reducing Residual Stress with Dukane’s Servo-Driven Ultrasonic Welder

Even on parts with good weld strength, failure can occur in the field due to residual stresses [A]. Withultrasonic welding, residual stresses are typically in the range of 35 MPa due to the rapid cooling of the small amount of melt [A, B]. Recent experimentation at Turku University

详情
2021-09-02

Experiments in Velocity Control with Dukane’s Servo-Driven Ultrasonic Welder

Even before the introduction of Dukane’sservo-driven welder, the need for velocity control was recognized. As Mikell Knights wrote in 2005, “Research has proven that consistency of melting rate has a direct influence on bond strength,” A linear velocity means a steady melt rate

详情
2021-09-02

Tech Center Shines!

We invite you to come see us atDukane’s Automotive Technical Centerin Wixom, Michigan. The place has taken on a new, refreshing look, and really shines!A recent upgrade to the facility coincides with some milestones for the company: 5 years for the Wixom Center, and 90 years for Dukane

详情
共72条 当前6/12页

杜肯超声波(常州)有限公司

江苏省常州市西湖路8号津通国际工业园5D幢

0519-86221716

dc-info@dukane.com

PPE Mask Production with Ultrasonic Bonding Technology

  • Faster cycle time
  • Consistent quality
  • Stronger seals